NIST Center for Neutron Research

SANS Sample Chamber

Sample Chamber and Huber Table Picture

Huber Table Schematic

The sample chamber for the 30m SANS instruments is used for our standard sample changers and a few of our smaller sample environments, such as the humidity cell. The beam height can be changed by a z-stage lab jack. The lab jack is attached to a computer-controlled translation stage and a computer-controlled rotation stage is available on request.

The chamber can be evacuated and/or purged with nitrogen or helium. Feed-throughs for ethylene glycol baths and 4-pin and 14-pin CPC connectors are available if any electroincs are needed inside the chamber while under vacuum.

The mounting hole pattern on the labjack is described to the right.

Sample Chamber and Huber Table Spacing

  |  SANS Home  |     |  SANS Instruments  |     |  Sample Environments  |     |  SANS Publications  |     |  Instrument Schedules  |     |  Low-Q Seminar Series  |     |  SANS Staff  |     |  Data Reduction and Analysis  |     |  Tutorials  |     |  Info For Users  |     |  SANS Calculations  |  

Last modified 29-August-2012 by website owner: NCNR (attn: Jeff Krzywon)