NIST Center for Neutron Research

Anton Paar DMA 5000 Density Meter

Description:

This instrument is used to perform accurate density measurements over a specified density, temperature, and viscosity range. At the end of an analysis, the results are either sent to an external printer or transmitted and stored by the AP-Soft Print Microsoft Excel Add-In.

Location: E136

Specifications / Capabilities:

  • Density Measuring Range: 0 g-cm-3 to 3 g-cm-3
  • Density Accuracy: ±0.000005 g-cm-3
  • Density Repeatability: 0.0000001 g-cm-3
  • Minimum Sample Volume: 1ml
  • Temperature Range: 0 °C to 90 °C
  • Temperature Accuracy: ±0.01 °C
  • Temperature Repeatability: 0.001 °C
  • Pressure Range: 0 bar to 10 bar

Access Information:

Please inquire with one of the listed contacts about the availability of the instrument prior to using it.
Anton Paar DMA 5000 Density Meter
Contact

Name: Mikala Shremshock
Phone: x8811

Disclaimer:
Any mention of commercial products within NIST web pages is for information only; it does not imply recommendation or endorsement by NIST.

Useful information: Available Equipment