skip to main content NIST Center for Neutron Research NIST Center for Neutron Research National Institute of Standards and Technology
Home Instruments Science Experiments SiteMap

7/14/03-7/18/03 Sample goniometers , slits, and beam stop.

Dial indicators are used to align the rotational axes of the theta and two-theta stages to within 0.0005" of each other

Dial indicators are used to align the rotational axes of the theta and two-theta stages to within 0.0005" of each other.

One set of slits are aligned with the beam

One set of slits are aligned with the beam

A spring loaded pulley and cable guides(not shown) are added to protect the motor cables for the theta goniometer

A spring loaded pulley and cable guides(not shown) are added to protect the motor cables for the theta goniometer.

The stair extension and new safety rails are added. The stair extension and new safety rails are added.

The stair extension and new safety rails are added.

The beam stop is built and set in place.

The beam stop is built and set in place.

The lower translation stage is mounted to the theta goniometer.

The lower translation stage is mounted to the theta goniometer.

The motor is added to the lower translation stage and the two tilt axes are added. The motor is added to the lower translation stage and the two tilt axes are added.

The motor is added to the lower translation stage and the two tilt axes are added.



Last modified 21-July-2003