BT8 Publications
1)
P. C. Brand, H. J. Prask, T. Gnaupel-Herold: Residual
Stress Measurements at the NIST Reactor, Proc. of the Int. Conf. On
Neutron Scattering, Physica B 241-243 (1998),
p 1244-1245
2)
Kesler, O., Matejicek, J., Sampath, S., Suresh, S., Gnaeupel-Herold, T., Brand, P. C., Prask, H. J.: Measurement of Residual Stress
in Plasma-Sprayed Metallic, Ceramic and Composite Coatings; Mater. Sci. Eng. A, Vol. 257, No. 2, 1998, 215-224
3)
T. Gnaupel-Herold, P. C. Brand, H. J. Prask, The
Calculation of Single Crystal Elastic Constants for Cubic Crystal Symmetry from
Powder Diffraction Data, J. Appl. Cryst. 31
(1998), 929-935
4) T. Gnaupel-Herold, P.C. Brand, H.J.
Prask, Neutron Diffraction Investigation of
Residual Stresses in Transverse/Oblique Rail Slices subjected to Different
Grinding Strategies, NISTIR 6305, 1999
5)
T. Gnaupel-Herold, H.J. Prask, A.V. Clark, C.S. Hehman, T.N. Nguyen, A Comparison of Neutron and
Ultrasonic Determinations of Residual Stress, Measurement Science and
Technology, 11 (2000), No. 4, 436-44
6) D.F.R. Mildner, H.H. Chen-Mayer, W. M. Gibson, T.Gnaupel-Herold,
M.E. Miller, H.J. Prask, A.J. Schultz, R. Vitt, R. Youngman, A monolithic polycapillary focusing optic for
polychromatic neutron diffraction applications, Review of
Scientific Instruments (2002), vol. 73, no.5, 1985-1993
7) W. M. Gibson,
A.J. Schultz, H.H. Chen-Mayer, D.F.R. Mildner, T.Gnaupel-Herold, M.E. Miller, H.J. Prask,
R. Vitt, R. Youngman, J.M. Carpenter, Polycapillary focusing optic for small-sample neutron crystallography,
J. Appl.ed Cryst. 35,
677-683 (2002)
8)
A. P. Reynolds, Wei Tang, T. Gnaupel-Herold, and H. Prask, Structure,
Properties, and Residual Stress of 304L Stainless Steel Friction Stir Welds,
Scripta Mater. 48 (9), 1289 (2003).
9)
Cheng XH, Fisher JW, Prask HJ, Gnaupel-Herold T, Yen BT, Roy S.
(2003), Residual stress modification by post-weld treatment and its
beneficial effect on fatigue strength of welded structures, Int. J.
Fatigue 25 (9-11), 1259-1269
10) F. Tang, H. Meeks, J. Spowart, T.Gnaupel-Herold, H.J.Prask, I. E. Anderson, Consolidation Effects on
Tensile Properties of a Pure Al Matrix Composites, Mat.Sci
Eng. A386 (2004), 194-204
11) F.
Tang, T.Gnaupel-Herold, H.Prask,
I.E.Anderson, Pure Al matrix composites
produced by vacuum hot pressing: tensile properties and strengthening
mechanisms Mat. Sci. Eng. A383
(2004), 362-373
12) S.W. Banovic,
M.D. Vaudin, T. H. Gnaeupel-Herold, D.M. Saylor, K.P Rodbell , Studies of
Deformation Induced Texture Development in Sheet Materials Using Diffraction
Techniques, Mat.Sci.Eng. A 380 (2004), 155-170
13) T. Gnaeupel-Herold,
H.J. Prask, R.J. Fields, T.J. Foecke,
Z.C. Xia, U. Lienert, A
Synchrotron Study of Residual Stresses in a Al6022 Deep Drawn Cup, Mat. Sci. Eng. A366 (2004),
104-113
14) T. Gnaeupel-Herold, T.J. Foecke, H.J. Prask, R.J. Fields, An Investigation of Springback
Stresses in an AISI-1010 Deep Drawn Cup, Mat. Sci. Eng. A 399(2005), 26-32
15) F. Tang, T.Gnaupel-Herold,
H.J.Prask, I.E.Anderson, Neutron
diffraction measurement on Residual Stresses and Stress Partitioning in Al/AlCuFe Composites, Mat.Sci
Eng. A399 (2005), 99-106
16) Michael Law, Thomas
Gnaupel-Herold, Graham Bowie, Residual stresses in gas pipelines,
Journal of Pipeline Integrity 4(3), 173-182 (2005)
17) M. Law, H.J. Prask,
V. Luzin, T. Gnaeupel-Herold, Residual Stress Measurement in coil, linepipe
and girth welded pipe, Materials Science and Engineering A 437 (2006) 60–63
18) T. Gnaupel-Herold, H.J. Prask, J. Barker,
F.S. Biancaniello, R.D. Jiggetts,
J. Matejicek, Microstructure, Mechanical
Properties, and Adhesion in IN625 Air Plasma Sprayed Coatings,
Mat.Sci.Eng.A421 (2006), 77-85
19) T. Foecke,T.
Gnaupel-Herold, Robustness
of the Sheet Metal Springback Cup Test, Metallurgical and Materials
Transactions A, Volume 37, Number 12, December 2006, pp. 3503-3510(8)
20) M.B. Prime, T.
Gnaupel-Herold, J.A. Baumann, R.J. Lederich, D.M.
Bowden, R.J. Sebring, Residual Stress Measurements in a Thick,
Dissimilar Aluminum-Alloy Friction Stir Weld, Acta Mat. 54 (2006),
4013-4021
21) D.
E. Boyce, P.R. Dawson, B. Sidle, T. Gnaupel-Herold, A Multiscale
Methodology for Deformation Modeling Applied to Friction Stir Welded Steel,
Computational Materials Science 38 (2006) 158–175
22) J. Ruiz-Hervias,
V. Luzin, H. Prask, T. Gnaeupel-Herold, M. Elices, Effect of thermo-mechanical treatments on
residual stresses measured by neutron diffraction in cold-drawn steel rods,
Mater. Sci. Eng. A 435–436 (2006) 725–735
23) W.B. Choi,
L. Li, V. Luzin, R. Neiser,
T. Gnaupel-Herold, H.J. Prask, S. Sampath,
A. Gouldstone, Integrated characterization of
cold sprayed aluminum coatings, Acta Mat. 55, 3(2007), 857-866
24) T. Gnaupel-Herold,
Formalism for the determination of intermediate stress gradients using
X-ray diffraction, J. Appl. Cryst.
(2009). 42, 192–197
25) S. E. Mikel,
J. J. Biernacki, T. Gnaeupel-Herold, A Neutron Diffraction-Based Technique for
Determining Phase Resolved Strains in Portland Cement , ACI Materials
Journal (2009), 106(5), 455-460
26) T. Gnaeupel-Herold, Techniques for Neutron Stress Determination
with High Spatial Resolution, J. Nondestruct.
Eval.
28 (2009), 149-155, DOI 10.1007/s10921-009-0057-5
27) V. Luzin, H.-J. Prask, T. Gnaupel-Herold, S. Sampath, Use of
neutron diffraction for stress measurements in thin and thick thermal sprayed
coatings, International Heat Treatment and Surface Engineering 4 (1), 2010, 17-24
28) T. Neeraj,
T. Gnaupel-Herold, H.J. Prask, R. Ayer, Residual
Stresses in Girth Welds of Carbon Steel Pipes: A Comparison between Ferritic
and Austenitic Weld Metals, Science and Technology of Welding and
Joining (2010), 16, 249-253
29) A. S. Khan, A. Pandey, T. Gnaupel-Herold, R. K. Mishra,
Mechanical response and texture evolution of AZ31 alloy at large strains
for different strain rates and temperatures: Part 1- Experimental results
(2011). Int. J. Plasticity, 27, 688-706
30) T. Gnaupel-Herold,
A. Creuziger, Diffraction Study of the Retained
Austenite Content in TRIP Steels, Mater. Sci.
Eng. A 528, 3594-3600, 2011
31) M.A. Iadicola, T. H. Gnaeupel-Herold, Effective
X-ray elastic constant measurement for in-situ stress measurement of biaxially
strained AA5754-O, (2012), Mater. Sci.
Eng. A 545, 168-175
32) T. Gnaupel-Herold,
A. Creuziger, M. Iadicola, A
model for calculating diffraction elastic constants, (2012), J. Appl. Cryst. 45, 197-206
33) T. Gnaupel-Herold, IsoDEC: A software for calculating diffraction
elastic constants, (2012), J. Appl. Cryst. 45,
573-574
34) T. Gnaeupel-Herold, A
Software for Diffraction Stress Factor Calculations For Textured Materials.
(Accepted), Powder Diffraction 27